Day

In our shop is a beautiful 30′ Hacker in need of some work on the transom. This is a beautiful boat with a great layout, which no doubt makes for a great day out on the lake. With the boat being as long as it is, the transom exposed from under the canopy to the hot sun, much on...

The ‘Wood Duck’ came to us after the 2013 boating season needing a re-finish job. We noticed that the finish on the boat looked a little odd, we didn’t know either what stain was or what type of finish what used. As we started stripping we realized that the boat had been...

“Mary Cloud” came to us needing some refinish work as well as some plank replacements on the hull sides. We began by drilling out the old planks and prepping the frames and battens for the new mahogany planks. Luckily most of the framework below the planks was in good...

Currently in the shop we have a very unique boat, a 1964 Cruisers Inc Navigator. We don’t see many of these beautiful boats. She is a dry boat and gives a very comfortable ride. She has a 95″ beam and 23′ length, and she’s powered by a 150 horsepower Mercruiser I/O, a very...

One of our customers had been complaining about excess water in his bilge and was keen to discover the cause. We immediately suspected the lower transom plank, which on these Centurys has always been a problem. The boat still had the original plank, and upon further inspection we...

“Roxanne” is a beautiful Palmer Launch with quite a history on Lake Winnipesaukee. After its sale the new owners came to us wanting to bring some new life back into her. She was sorely in need of a new floor, some attention to the plank seams on the bottom, varnish...